A mixer is the source of yummy edible delights. We prepare dessert and baked items like fancy breads, cinnamon rolls, or birthday cakes with a stand mixer. After doing loads of mixing on the mixer, moving it from the cabinet or countertop is almost impossible. If you have mixing work daily, it is impossible to move the stand mixer regularly. There will be scattering flour, spilled batter around the mixer. When you move it, all the mess comes with the mixer.
Every day, the mixer will be dirty with solid markings from a splash of vanilla, an egg smudge, and a flour poof. With a practical design, the KitchenAid stand mixer has different parts which get messy after every use. It is essential to clean it daily.
How to clean KitchenAid Mixer? If you know the process correctly, all the mess will not trouble anymore. Without the proper knowledge, you cannot deep clean the mixer, and it will not be ready for the next mixing batch. Know the process and learn to wash correctly.
How To Clean KitchenAid Mixer In 9 Steps
If you cannot clean the mixer properly, there will be leftovers, which will trouble your food hygiene. After every use, the shaft of the mixer gets dirtiest, which needs extra scrubbing and washing. When you clean it, you also have to pay attention to the levers and knobs of the mixer.
The surface of the mixer is not less dirty at all. Though food ingredients remain inside, dust and oils can mess with the surface because the mixer stays on the countertop open. To make the mixer perfect for the subsequent batch mixing, you can go for a deep cleaning process that ensures health safety.
Necessary Ingredients and Equipment for Deep Cleaning of the Mixer
- Cotton cloth or the microfiber
- Pipe cleaner or toothpick
- Scrub brush in small size or toothbrush
- Liquid dish soap
- Baking soda
Step by Step Process To Clean A KitchenAid Mixer
These steps are enough to clean the mixer without damaging any parts adequately. If you start to clean all the pieces at once, it may harm any mixer parts. If you do not need deep cleaning, you may skip the ‘tough cleaning’ step.
Let’s learn the steps and follow them carefully.
Step-1: Unplugging
Safely Unplug the mixer. It is the first step to ensure safety as it is an electronic device.
Step-2: Wash the Attachments
Begin washing process of the mixer with the attachments. Remove all the extensions, including the hooks, beaters, shield. Then wash them with warm soapy water. After washing them, properly dry them out before installing them or storing them.
Step-3: Mixing Bowl
Bring hot water and add liquid soap or dishwasher to it. Then wash the bowl properly. If you are cleaning it after several days, take your time to softly scrub the steel-made bowl so that all the water spots or other blemishes get cleaned.
Step-4: Removing Spills and Residue
After each use, there will be spills, splatters, and other residues all over the mixer. Wipe them softly using a damp cloth. You can use a mild cleaner on the fabric too. It is a better practice to remove these spills after every use.
While doing it, you should take proper care of liquid leaked into the ventilation openings. It is possible, especially in motorhead, knobs, and levers, including the locking lever and the speed control knob. In these areas, spills have been collected, so you have to wipe them out after squeezing the damp cloth properly.
Step-5: Tough Cleaning
To clean dirtier places or some inner parts with stubborn residue, make a mixture of warm water and baking soda. Then use a small scrubbing brush or toothbrush to scrub and clean all the grime. Some stubborn places are the bowl camp plate and the strip of the speed control option. After cleaning these parts, go for cleaning the inside attachments. To reach them, you have to unscrew the attachment hub plate. Then you can clean it with scrub and water.
Step-6: Motor Head
To reach the motorhead parts, at first, tilt the head a bit to the back and then lock it into the place. Then you can get the beater shaft. Clean it thoroughly with water, at first. Clean the surrounding of the post, including the clip, where lots of tiny ingredients are stuck. First, wipe these places using a paper towel and then use the brush for deep cleaning and remove the dry flour spills and other stuck ingredients.
Step-7: Clean the Build Up
Some parts of the mixer are easy to stay unnoticed. Pay special attention to those places and clean carefully. One of the hidden places is the rim found at the back part of the motorhead casing. This place collects loads of dust even the mixer stays unused. After use, this place is full of grime and spills. Another area is under the motorhead, which is the lipped part. It is also a prominent part to collect the splatters and residue. There are also splatters around the exposed screws.
Check all these parts closely and clean them properly using a toothbrush. Remove the residue dry at first and then wipe them using the damp cloth.
Step-8: Ventilation Shaft
For expert performance, the ventilation shaft is the most necessary part. If it is cleaned properly, it ensures the same performance as the new mixer.
Check closely and remove all the splatters, crumbs, and even dust from the ventilation shaft. You can use a toothpick to remove large parts from the shaft and use a brush to clean all the dust and tiny particles. The vacuum cleaner is a great option to clean the smallest detail or grains of dust and crumbs. Use the vacuum cleaner at slow speed and low power.
Step-9: Underneath Clean
After cleaning all the parts of the mixer, lay down the mixer on its side. It will open the underneath area. Softly wipe the bottom part of the mixer. Use a mild cleanser on a soft cloth or paper towel and wipe the bottom of the mixer softly. Clean the footpads too.
After completing the cleaning and washing process, do not install the attachments and other open parts before drying again. There should not be any water inside or near the electrical connections as it is an electrical device.
If you have the hand mixer, you have to follow this process to clean it. Most of the parts are common in the kitchenaid hand mixer, and some parts are missing. But you have to clean the hand mixer following the same cleaning process for the beaters, motor assembly, colling fan, worm gear, pinion gears, etc.
Final Words
Almost all of us have a mixer in our kitchen. It is a regular part of the kitchen. KitchenAid mixer is the most potent addition to your kitchen. If you use the mixer every day, you must clean it after each use. Otherwise, it will affect the performance and the durability of the mixer. If you are a professional mixer user in the restaurant or food truck, you must know how to clean the KitchenAid mixer.
You do not have to learn the process from any professionals. By following the steps that are presented on this page, you can clean kitchenaid mixer deeply.